Dryzone DPC Damp Proof Injection Cream - 310ml
Professional-Grade Damp Proofing Cream for Treating Rising Damp in Masonry
Dryzone Damp Proofing Cream is a high-strength, silane/siloxane-based formulation developed to stop rising damp in brick, stone, and mortar walls. Designed for easy and mess-free application with a standard 310ml cartridge gun, it forms a permanent chemical damp-proof course (DPC) that penetrates deeply into the substrate. Ideal for both professional tradespeople and DIY users looking for a reliable, BBA-certified rising damp treatment.
Key Features & Benefits
- BBA Certified: Independently approved for damp-proofing effectiveness (Cert. 97/3363).
- Quick & Clean Application: Fits standard 310ml caulking guns ā no specialist tools required.
- Effective Damp Control: Stops rising damp by forming a chemical barrier within the mortar course.
- Suitable for Various Walls: Works in brick, stone, and mixed masonry constructions.
- Low Waste: Ready-to-use, non-drip formulation ensures accurate dosing and minimal mess.
Product Details
- Size: 310ml cartridge
- Form: Silane/siloxane damp-proofing cream
- Colour: White (fades as it penetrates)
- Coverage: Approx. 2.5 linear metres per 310ml cartridge in a 215mm thick solid wall
- Application Tool: Standard skeleton or mastic gun
Application Instructions
- Drill Holes: Drill 12mm diameter holes into the mortar bed at 120mm centres, typically 150mm above ground level.
- Inject Cream: Fill each hole from the back to the front using a smooth, continuous action.
- Allow to Cure: The cream will diffuse and cure within the wall, forming a damp-proof barrier.
- Replastering: Use a salt-resistant plaster or renovating render after DPC installation if necessary.
Coverage Table
| Wall Thickness (mm) | Number of 12mm Ć Holes per metre | Depth of Hole (mm) | Metres Treated per 310ml Cartridge |
|---|---|---|---|
| 102 (4.5") | 8 | 90 | 5.0 |
| 215 (9") | 8 | 190 | 2.5 |
| 328 (13") | 8 | 310 | 1.5 |
| 440 (17.5") | 8 | 420 | 1.0 |
Figures are approximate and may vary based on substrate type and site conditions.
Limitations
- Do not use on saturated or waterlogged walls.
- Only for use in masonry ā not suitable for timber or plasterboard surfaces.
Health & Safety
Use in well-ventilated areas. Wear gloves and eye protection during application. Refer to the Safety Data Sheet (SDS) before use for full handling instructions.
Dryzone DPC Damp Proof Injection Cream - 310ml
Professional-Grade Damp Proofing Cream for Treating Rising Damp in Masonry
Dryzone Damp Proofing Cream is a high-strength, silane/siloxane-based formulation developed to stop rising damp in brick, stone, and mortar walls. Designed for easy and mess-free application with a standard 310ml cartridge gun, it forms a permanent chemical damp-proof course (DPC) that penetrates deeply into the substrate. Ideal for both professional tradespeople and DIY users looking for a reliable, BBA-certified rising damp treatment.
Key Features & Benefits
- BBA Certified: Independently approved for damp-proofing effectiveness (Cert. 97/3363).
- Quick & Clean Application: Fits standard 310ml caulking guns ā no specialist tools required.
- Effective Damp Control: Stops rising damp by forming a chemical barrier within the mortar course.
- Suitable for Various Walls: Works in brick, stone, and mixed masonry constructions.
- Low Waste: Ready-to-use, non-drip formulation ensures accurate dosing and minimal mess.
Product Details
- Size: 310ml cartridge
- Form: Silane/siloxane damp-proofing cream
- Colour: White (fades as it penetrates)
- Coverage: Approx. 2.5 linear metres per 310ml cartridge in a 215mm thick solid wall
- Application Tool: Standard skeleton or mastic gun
Application Instructions
- Drill Holes: Drill 12mm diameter holes into the mortar bed at 120mm centres, typically 150mm above ground level.
- Inject Cream: Fill each hole from the back to the front using a smooth, continuous action.
- Allow to Cure: The cream will diffuse and cure within the wall, forming a damp-proof barrier.
- Replastering: Use a salt-resistant plaster or renovating render after DPC installation if necessary.
Coverage Table
| Wall Thickness (mm) | Number of 12mm Ć Holes per metre | Depth of Hole (mm) | Metres Treated per 310ml Cartridge |
|---|---|---|---|
| 102 (4.5") | 8 | 90 | 5.0 |
| 215 (9") | 8 | 190 | 2.5 |
| 328 (13") | 8 | 310 | 1.5 |
| 440 (17.5") | 8 | 420 | 1.0 |
Figures are approximate and may vary based on substrate type and site conditions.
Limitations
- Do not use on saturated or waterlogged walls.
- Only for use in masonry ā not suitable for timber or plasterboard surfaces.
Health & Safety
Use in well-ventilated areas. Wear gloves and eye protection during application. Refer to the Safety Data Sheet (SDS) before use for full handling instructions.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Professional-Grade Damp Proofing Cream for Treating Rising Damp in Masonry
Dryzone Damp Proofing Cream is a high-strength, silane/siloxane-based formulation developed to stop rising damp in brick, stone, and mortar walls. Designed for easy and mess-free application with a standard 310ml cartridge gun, it forms a permanent chemical damp-proof course (DPC) that penetrates deeply into the substrate. Ideal for both professional tradespeople and DIY users looking for a reliable, BBA-certified rising damp treatment.
Key Features & Benefits
- BBA Certified: Independently approved for damp-proofing effectiveness (Cert. 97/3363).
- Quick & Clean Application: Fits standard 310ml caulking guns ā no specialist tools required.
- Effective Damp Control: Stops rising damp by forming a chemical barrier within the mortar course.
- Suitable for Various Walls: Works in brick, stone, and mixed masonry constructions.
- Low Waste: Ready-to-use, non-drip formulation ensures accurate dosing and minimal mess.
Product Details
- Size: 310ml cartridge
- Form: Silane/siloxane damp-proofing cream
- Colour: White (fades as it penetrates)
- Coverage: Approx. 2.5 linear metres per 310ml cartridge in a 215mm thick solid wall
- Application Tool: Standard skeleton or mastic gun
Application Instructions
- Drill Holes: Drill 12mm diameter holes into the mortar bed at 120mm centres, typically 150mm above ground level.
- Inject Cream: Fill each hole from the back to the front using a smooth, continuous action.
- Allow to Cure: The cream will diffuse and cure within the wall, forming a damp-proof barrier.
- Replastering: Use a salt-resistant plaster or renovating render after DPC installation if necessary.
Coverage Table
| Wall Thickness (mm) | Number of 12mm Ć Holes per metre | Depth of Hole (mm) | Metres Treated per 310ml Cartridge |
|---|---|---|---|
| 102 (4.5") | 8 | 90 | 5.0 |
| 215 (9") | 8 | 190 | 2.5 |
| 328 (13") | 8 | 310 | 1.5 |
| 440 (17.5") | 8 | 420 | 1.0 |
Figures are approximate and may vary based on substrate type and site conditions.
Limitations
- Do not use on saturated or waterlogged walls.
- Only for use in masonry ā not suitable for timber or plasterboard surfaces.
Health & Safety
Use in well-ventilated areas. Wear gloves and eye protection during application. Refer to the Safety Data Sheet (SDS) before use for full handling instructions.
