Epoxy Tanking - Waterproofing System for Concrete and Masonry - Biokil Crown
Solvent-Free, Two-Part Epoxy Waterproofing System for Concrete and Masonry
Biokil Crown Epoxy Tanking is a high-performance, two-component, solvent-free epoxy coating formulated to provide a durable, chemical- and water-resistant barrier to internal concrete and masonry surfaces. Suitable for tanking basements, retaining walls, inspection pits, and plant rooms, it cures to form a tough, impermeable membrane that resists both moisture ingress and negative hydrostatic pressure. It also serves as a protective coating in areas subject to high humidity or chemical exposure.
Key Features & Benefits
- Water & Vapour Barrier: Provides long-lasting protection against water ingress, damp, and vapour transmission.
- Solvent-Free Formula: Low odour and safe for use in confined or sensitive environments.
- Chemical Resistance: Resistant to a wide range of mild acids, alkalis, and cleaning chemicals.
- Negative & Positive Pressure: Suitable for areas exposed to water pressure from either side of the structure.
- Easy to Apply: Can be applied by roller, brush, or airless spray in two coats.
Product Details
- Type: Two-component solvent-free epoxy resin system
- Components: Part A (resin) and Part B (hardener)
- Colour: Grey (other colours available upon request)
- Coverage: Approx. 3–4 m²/kg for two coats, depending on substrate porosity
- Pot Life: Approx. 40 minutes at 20°C
- Full Cure: 5–7 days
- Packaging: Typically supplied in 5kg or 10kg kits
- SKU: BCEPXTANK5 / BCEPXTANK10
Application Instructions
- Surface Preparation: Surfaces must be sound, clean, and free from dust, oil, or contaminants. Slightly damp substrates are acceptable.
- Mixing: Add Part B (hardener) to Part A (resin) and mix thoroughly with a slow-speed drill and paddle mixer.
- First Coat: Apply evenly using a brush or roller. Allow to cure for 12–18 hours depending on conditions.
- Second Coat: Apply perpendicular to the first. Ensure full coverage and membrane thickness.
- Protection: Avoid water exposure during curing. Can be overlaid with screeds, renders, or tile finishes.
Limitations
- Do not apply at temperatures below +5°C or in damp, unventilated conditions during curing.
- Not suitable for external UV-exposed surfaces unless overcoated with a protective finish.
Health & Safety
Contains epoxy resins and hardeners — may cause allergic reactions or skin irritation. Always wear gloves, goggles, and respiratory protection. Refer to the product’s Safety Data Sheet (SDS) before use.
Original: $138.00
-65%$138.00
$48.30Epoxy Tanking - Waterproofing System for Concrete and Masonry - Biokil Crown
Solvent-Free, Two-Part Epoxy Waterproofing System for Concrete and Masonry
Biokil Crown Epoxy Tanking is a high-performance, two-component, solvent-free epoxy coating formulated to provide a durable, chemical- and water-resistant barrier to internal concrete and masonry surfaces. Suitable for tanking basements, retaining walls, inspection pits, and plant rooms, it cures to form a tough, impermeable membrane that resists both moisture ingress and negative hydrostatic pressure. It also serves as a protective coating in areas subject to high humidity or chemical exposure.
Key Features & Benefits
- Water & Vapour Barrier: Provides long-lasting protection against water ingress, damp, and vapour transmission.
- Solvent-Free Formula: Low odour and safe for use in confined or sensitive environments.
- Chemical Resistance: Resistant to a wide range of mild acids, alkalis, and cleaning chemicals.
- Negative & Positive Pressure: Suitable for areas exposed to water pressure from either side of the structure.
- Easy to Apply: Can be applied by roller, brush, or airless spray in two coats.
Product Details
- Type: Two-component solvent-free epoxy resin system
- Components: Part A (resin) and Part B (hardener)
- Colour: Grey (other colours available upon request)
- Coverage: Approx. 3–4 m²/kg for two coats, depending on substrate porosity
- Pot Life: Approx. 40 minutes at 20°C
- Full Cure: 5–7 days
- Packaging: Typically supplied in 5kg or 10kg kits
- SKU: BCEPXTANK5 / BCEPXTANK10
Application Instructions
- Surface Preparation: Surfaces must be sound, clean, and free from dust, oil, or contaminants. Slightly damp substrates are acceptable.
- Mixing: Add Part B (hardener) to Part A (resin) and mix thoroughly with a slow-speed drill and paddle mixer.
- First Coat: Apply evenly using a brush or roller. Allow to cure for 12–18 hours depending on conditions.
- Second Coat: Apply perpendicular to the first. Ensure full coverage and membrane thickness.
- Protection: Avoid water exposure during curing. Can be overlaid with screeds, renders, or tile finishes.
Limitations
- Do not apply at temperatures below +5°C or in damp, unventilated conditions during curing.
- Not suitable for external UV-exposed surfaces unless overcoated with a protective finish.
Health & Safety
Contains epoxy resins and hardeners — may cause allergic reactions or skin irritation. Always wear gloves, goggles, and respiratory protection. Refer to the product’s Safety Data Sheet (SDS) before use.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Solvent-Free, Two-Part Epoxy Waterproofing System for Concrete and Masonry
Biokil Crown Epoxy Tanking is a high-performance, two-component, solvent-free epoxy coating formulated to provide a durable, chemical- and water-resistant barrier to internal concrete and masonry surfaces. Suitable for tanking basements, retaining walls, inspection pits, and plant rooms, it cures to form a tough, impermeable membrane that resists both moisture ingress and negative hydrostatic pressure. It also serves as a protective coating in areas subject to high humidity or chemical exposure.
Key Features & Benefits
- Water & Vapour Barrier: Provides long-lasting protection against water ingress, damp, and vapour transmission.
- Solvent-Free Formula: Low odour and safe for use in confined or sensitive environments.
- Chemical Resistance: Resistant to a wide range of mild acids, alkalis, and cleaning chemicals.
- Negative & Positive Pressure: Suitable for areas exposed to water pressure from either side of the structure.
- Easy to Apply: Can be applied by roller, brush, or airless spray in two coats.
Product Details
- Type: Two-component solvent-free epoxy resin system
- Components: Part A (resin) and Part B (hardener)
- Colour: Grey (other colours available upon request)
- Coverage: Approx. 3–4 m²/kg for two coats, depending on substrate porosity
- Pot Life: Approx. 40 minutes at 20°C
- Full Cure: 5–7 days
- Packaging: Typically supplied in 5kg or 10kg kits
- SKU: BCEPXTANK5 / BCEPXTANK10
Application Instructions
- Surface Preparation: Surfaces must be sound, clean, and free from dust, oil, or contaminants. Slightly damp substrates are acceptable.
- Mixing: Add Part B (hardener) to Part A (resin) and mix thoroughly with a slow-speed drill and paddle mixer.
- First Coat: Apply evenly using a brush or roller. Allow to cure for 12–18 hours depending on conditions.
- Second Coat: Apply perpendicular to the first. Ensure full coverage and membrane thickness.
- Protection: Avoid water exposure during curing. Can be overlaid with screeds, renders, or tile finishes.
Limitations
- Do not apply at temperatures below +5°C or in damp, unventilated conditions during curing.
- Not suitable for external UV-exposed surfaces unless overcoated with a protective finish.
Health & Safety
Contains epoxy resins and hardeners — may cause allergic reactions or skin irritation. Always wear gloves, goggles, and respiratory protection. Refer to the product’s Safety Data Sheet (SDS) before use.
