🎉 Up to 70% Off Selected ItemsShop Sale
GoPoxy Poly Grout (White) – UV-Resistant, No-Mess, Fast-Cure
GoPoxy User Manual GoPoxy Poly Grout (White) is a two-part polyaspartic-based, UV-resistant grout that keeps light colours bright without yellowing. The no-mess peel-off formula minimises residue and cleanup time while delivering a dense, waterproof, stain-resistant finish for residential and commercial tiling.
Each tube includes 1 mixing nozzle. GoPoxy Tool Kit required for application. Don’t have one? Grab it here – GoPoxy Toolkit.
Why Choose GoPoxy Polyurea?
- Fully UV-resistant: Maintains bright white and light tones—no yellowing.
- Fast cure: Surface dry in ~1 hour; fully cured in under 8 hours (conditions dependent).
- No-mess peel-off cleanup: Removes easily with minimal detergent, no haze.
- Waterproof & durable: Dense, non-porous, stain- and chemical-resistant finish.
- Crack & mold resistant: Solid, non-porous joint resists growth and micro-cracking.
- Versatile: Walls, floors, mitred edges; ceramic, porcelain and glass tiles.
- Low-VOC, solvent-free: Eco-considerate and non-hazardous.
How to Use
Preparation
- Ensure joints are clean, dry and free of adhesive.
- Protect porous or textured tiles with priming wax or masking tape.
- Always test on a small, inconspicuous area first.
Mixing & Application
- Open the sealed packaging only when ready to apply (material begins to set on air exposure).
- Insert the cartridge into a compatible grout gun and attach the mixing nozzle firmly.
- If too viscous, warm the cartridge in hand-hot water for 5–10 minutes (do not overheat).
- Discard the first ~40 cm to ensure full component mixing.
- Apply slowly to fully fill joints; use GoPoxy finishing tools for a smooth profile.
Curing
- Working time: limited—work continuously once dispensing begins.
- Surface dry: ~1 hour
- Full cure: <8 hours (temperature/humidity dependent)
Important vs. GoPoxy Epoxy Grout
- Polyurea is UV-resistant (won’t yellow); epoxy is not.
- Polyurea must be used in one go: once exposed to air it will set and cannot be reused (even with a new nozzle).
- Polyurea may be warmed gently for easier dispensing; do not heat epoxy.
Storage
- Store at 8–18 °C in a cool, dry place away from sunlight.
- Do not smoke or use near open flame.
Suitability & Limitations
- Not ideal for mosaics (time/cost) or very porous stone (e.g., sandstone).
- Work efficiently to avoid solidifying product in the tube.
Aftercare
- Clean with pH-neutral products only; avoid acidic/alkaline cleaners.
- Routine gentle cleaning helps maintain colour and finish.
PPE & Safety
- Read the instructions fully before use; keep away from children/animals.
- Eye/face: Safety glasses with side protection (BS EN ISO 16321-1:2022).
- Hands: Protective gloves (BS EN ISO 374). Replace at first signs of wear.
- Skin/body: Protective clothing as task requires (e.g., apron BS EN 14605:2005+A1:2009; footwear BS EN ISO 20345:2022+A1:2024).
- Respiratory: If ventilation is poor, use a mask (BS EN 136) with A2-P2 filter (BS EN 14387). For atmospheres beyond filter limits or <17% O2, use SCBA per BS EN 137/138.
Specs at a Glance
| Chemistry | Two-part polyurea / polyaspartic |
|---|---|
| Colour | White (UV-stable) |
| Format | Twin-cartridge, pre-dosed |
| Included | 1 × mixing nozzle per tube |
| Working time | Short; continuous application recommended |
| Surface dry | ~1 hour |
| Full cure | <8 hours (dependant on conditions) |
| Cleanup | No-mess peel-off |
| Tiles | Ceramic, porcelain, glass |
Disclaimer
Performance depends on correct preparation, application and site conditions. Always test a small area first to confirm suitability, colour and finish. By using this product you accept responsibility for application outcomes. Safety Data Sheet available on request.
$10.15
Original: $29.00
-65%GoPoxy Poly Grout (White) – UV-Resistant, No-Mess, Fast-Cure—
$29.00
$10.15More Images
GoPoxy Poly Grout (White) – UV-Resistant, No-Mess, Fast-Cure
GoPoxy Poly Grout (White) is a two-part polyaspartic-based, UV-resistant grout that keeps light colours bright without yellowing. The no-mess peel-off formula minimises residue and cleanup time while delivering a dense, waterproof, stain-resistant finish for residential and commercial tiling.
Each tube includes 1 mixing nozzle. GoPoxy Tool Kit required for application. Don’t have one? Grab it here – GoPoxy Toolkit.
Why Choose GoPoxy Polyurea?
- Fully UV-resistant: Maintains bright white and light tones—no yellowing.
- Fast cure: Surface dry in ~1 hour; fully cured in under 8 hours (conditions dependent).
- No-mess peel-off cleanup: Removes easily with minimal detergent, no haze.
- Waterproof & durable: Dense, non-porous, stain- and chemical-resistant finish.
- Crack & mold resistant: Solid, non-porous joint resists growth and micro-cracking.
- Versatile: Walls, floors, mitred edges; ceramic, porcelain and glass tiles.
- Low-VOC, solvent-free: Eco-considerate and non-hazardous.
How to Use
Preparation
- Ensure joints are clean, dry and free of adhesive.
- Protect porous or textured tiles with priming wax or masking tape.
- Always test on a small, inconspicuous area first.
Mixing & Application
- Open the sealed packaging only when ready to apply (material begins to set on air exposure).
- Insert the cartridge into a compatible grout gun and attach the mixing nozzle firmly.
- If too viscous, warm the cartridge in hand-hot water for 5–10 minutes (do not overheat).
- Discard the first ~40 cm to ensure full component mixing.
- Apply slowly to fully fill joints; use GoPoxy finishing tools for a smooth profile.
Curing
- Working time: limited—work continuously once dispensing begins.
- Surface dry: ~1 hour
- Full cure: <8 hours (temperature/humidity dependent)
Important vs. GoPoxy Epoxy Grout
- Polyurea is UV-resistant (won’t yellow); epoxy is not.
- Polyurea must be used in one go: once exposed to air it will set and cannot be reused (even with a new nozzle).
- Polyurea may be warmed gently for easier dispensing; do not heat epoxy.
Storage
- Store at 8–18 °C in a cool, dry place away from sunlight.
- Do not smoke or use near open flame.
Suitability & Limitations
- Not ideal for mosaics (time/cost) or very porous stone (e.g., sandstone).
- Work efficiently to avoid solidifying product in the tube.
Aftercare
- Clean with pH-neutral products only; avoid acidic/alkaline cleaners.
- Routine gentle cleaning helps maintain colour and finish.
PPE & Safety
- Read the instructions fully before use; keep away from children/animals.
- Eye/face: Safety glasses with side protection (BS EN ISO 16321-1:2022).
- Hands: Protective gloves (BS EN ISO 374). Replace at first signs of wear.
- Skin/body: Protective clothing as task requires (e.g., apron BS EN 14605:2005+A1:2009; footwear BS EN ISO 20345:2022+A1:2024).
- Respiratory: If ventilation is poor, use a mask (BS EN 136) with A2-P2 filter (BS EN 14387). For atmospheres beyond filter limits or <17% O2, use SCBA per BS EN 137/138.
Specs at a Glance
| Chemistry | Two-part polyurea / polyaspartic |
|---|---|
| Colour | White (UV-stable) |
| Format | Twin-cartridge, pre-dosed |
| Included | 1 × mixing nozzle per tube |
| Working time | Short; continuous application recommended |
| Surface dry | ~1 hour |
| Full cure | <8 hours (dependant on conditions) |
| Cleanup | No-mess peel-off |
| Tiles | Ceramic, porcelain, glass |
Disclaimer
Performance depends on correct preparation, application and site conditions. Always test a small area first to confirm suitability, colour and finish. By using this product you accept responsibility for application outcomes. Safety Data Sheet available on request.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
GoPoxy Poly Grout (White) is a two-part polyaspartic-based, UV-resistant grout that keeps light colours bright without yellowing. The no-mess peel-off formula minimises residue and cleanup time while delivering a dense, waterproof, stain-resistant finish for residential and commercial tiling.
Each tube includes 1 mixing nozzle. GoPoxy Tool Kit required for application. Don’t have one? Grab it here – GoPoxy Toolkit.
Why Choose GoPoxy Polyurea?
- Fully UV-resistant: Maintains bright white and light tones—no yellowing.
- Fast cure: Surface dry in ~1 hour; fully cured in under 8 hours (conditions dependent).
- No-mess peel-off cleanup: Removes easily with minimal detergent, no haze.
- Waterproof & durable: Dense, non-porous, stain- and chemical-resistant finish.
- Crack & mold resistant: Solid, non-porous joint resists growth and micro-cracking.
- Versatile: Walls, floors, mitred edges; ceramic, porcelain and glass tiles.
- Low-VOC, solvent-free: Eco-considerate and non-hazardous.
How to Use
Preparation
- Ensure joints are clean, dry and free of adhesive.
- Protect porous or textured tiles with priming wax or masking tape.
- Always test on a small, inconspicuous area first.
Mixing & Application
- Open the sealed packaging only when ready to apply (material begins to set on air exposure).
- Insert the cartridge into a compatible grout gun and attach the mixing nozzle firmly.
- If too viscous, warm the cartridge in hand-hot water for 5–10 minutes (do not overheat).
- Discard the first ~40 cm to ensure full component mixing.
- Apply slowly to fully fill joints; use GoPoxy finishing tools for a smooth profile.
Curing
- Working time: limited—work continuously once dispensing begins.
- Surface dry: ~1 hour
- Full cure: <8 hours (temperature/humidity dependent)
Important vs. GoPoxy Epoxy Grout
- Polyurea is UV-resistant (won’t yellow); epoxy is not.
- Polyurea must be used in one go: once exposed to air it will set and cannot be reused (even with a new nozzle).
- Polyurea may be warmed gently for easier dispensing; do not heat epoxy.
Storage
- Store at 8–18 °C in a cool, dry place away from sunlight.
- Do not smoke or use near open flame.
Suitability & Limitations
- Not ideal for mosaics (time/cost) or very porous stone (e.g., sandstone).
- Work efficiently to avoid solidifying product in the tube.
Aftercare
- Clean with pH-neutral products only; avoid acidic/alkaline cleaners.
- Routine gentle cleaning helps maintain colour and finish.
PPE & Safety
- Read the instructions fully before use; keep away from children/animals.
- Eye/face: Safety glasses with side protection (BS EN ISO 16321-1:2022).
- Hands: Protective gloves (BS EN ISO 374). Replace at first signs of wear.
- Skin/body: Protective clothing as task requires (e.g., apron BS EN 14605:2005+A1:2009; footwear BS EN ISO 20345:2022+A1:2024).
- Respiratory: If ventilation is poor, use a mask (BS EN 136) with A2-P2 filter (BS EN 14387). For atmospheres beyond filter limits or <17% O2, use SCBA per BS EN 137/138.
Specs at a Glance
| Chemistry | Two-part polyurea / polyaspartic |
|---|---|
| Colour | White (UV-stable) |
| Format | Twin-cartridge, pre-dosed |
| Included | 1 × mixing nozzle per tube |
| Working time | Short; continuous application recommended |
| Surface dry | ~1 hour |
| Full cure | <8 hours (dependant on conditions) |
| Cleanup | No-mess peel-off |
| Tiles | Ceramic, porcelain, glass |
Disclaimer
Performance depends on correct preparation, application and site conditions. Always test a small area first to confirm suitability, colour and finish. By using this product you accept responsibility for application outcomes. Safety Data Sheet available on request.
