🎉 Up to 70% Off Selected ItemsShop Sale
EVERBUILD® Gun A Nail® Standard – 310ml
High-Strength, Solvent-Free Grab Adhesive for Interior Applications
EVERBUILD® Gun A Nail® Standard is a high-strength, gap-filling, multi-purpose building adhesive based on a tackified solvent-free system. It is designed for a wide variety of building and home improvement applications where at least one of the substrates to be bonded is porous.
Key Features & Benefits
- Solvent-Free: Environmentally friendly formulation with no hazardous solvents.
- Excellent Adhesion: Adheres to most common surfaces, including damp substrates.
- High Initial Grab: Exceptional early grab properties suitable for both vertical and horizontal positions.
- Gap-Filling: High solids formulation provides excellent gap-filling properties without shrinkage.
- Extended Open Time: Allows for easy repositioning after fixing.
- Water Clean-Up: Tools and excess adhesive can be cleaned with water before curing.
Ideal For
- Bonding dado rails, architraves, and skirting boards.
- Fixing wall cladding directly to internal wall surfaces or timber battens.
- Fixing battens directly onto walls without fastenings.
- Bonding carpet gripper systems to most floors without the need for nails or tacks.
- Bonding stair nosing to concrete or wooden stairs.
- Securing aluminium or other skin panels to the framework of portable industrial buildings and caravans.
Product Details
- Colour: White
- Packaging: 310ml cartridge
- Density: 1.50 – 1.60 g/cm³
- Solid Content: 75 – 80%
- Service Temperature: -10°C to +70°C
- Open Time: Maximum 10 minutes at 23°C and 50% RH
- Curing Time: 24–48 hours depending on substrates
- Shelf Life: 24 months from date of manufacture
- Storage Conditions: Store in original unopened containers between +5°C and +25°C
Application Instructions
- Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants. Wood, plaster, and brick may be damp but not running wet.
- Application: Cut the tip of the cartridge, attach the nozzle, and cut an aperture to the required width. Apply using a standard sealant gun.
- Bonding: Apply the adhesive to one surface in strips or daubs. Bring the two surfaces together immediately and apply even pressure across the bond line.
- Repositioning: If necessary, adjust the positioning within the open time before the adhesive sets.
- Clamping: For heavy items, provide temporary support until the adhesive has dried.
Limitations
- Not suitable for use where both surfaces are non-porous (e.g., plastic/plastic or metal/metal); use EVERBUILD® Gun A Nail® Extra in such cases.
- Not recommended for use as a mirror adhesive; use EVERBUILD® Mirror Mate® instead.
- External applications may result in slower curing; for such applications, consider using EVERBUILD® Gun A Nail® Extra.
Cleaning of Tools
Clean tools and excess adhesive immediately with water before the adhesive cures. Cured adhesive must be removed mechanically.
$25.72
Original: $73.50
-65%EVERBUILD® Gun A Nail® Standard – 310ml—
$73.50
$25.72EVERBUILD® Gun A Nail® Standard – 310ml
High-Strength, Solvent-Free Grab Adhesive for Interior Applications
EVERBUILD® Gun A Nail® Standard is a high-strength, gap-filling, multi-purpose building adhesive based on a tackified solvent-free system. It is designed for a wide variety of building and home improvement applications where at least one of the substrates to be bonded is porous.
Key Features & Benefits
- Solvent-Free: Environmentally friendly formulation with no hazardous solvents.
- Excellent Adhesion: Adheres to most common surfaces, including damp substrates.
- High Initial Grab: Exceptional early grab properties suitable for both vertical and horizontal positions.
- Gap-Filling: High solids formulation provides excellent gap-filling properties without shrinkage.
- Extended Open Time: Allows for easy repositioning after fixing.
- Water Clean-Up: Tools and excess adhesive can be cleaned with water before curing.
Ideal For
- Bonding dado rails, architraves, and skirting boards.
- Fixing wall cladding directly to internal wall surfaces or timber battens.
- Fixing battens directly onto walls without fastenings.
- Bonding carpet gripper systems to most floors without the need for nails or tacks.
- Bonding stair nosing to concrete or wooden stairs.
- Securing aluminium or other skin panels to the framework of portable industrial buildings and caravans.
Product Details
- Colour: White
- Packaging: 310ml cartridge
- Density: 1.50 – 1.60 g/cm³
- Solid Content: 75 – 80%
- Service Temperature: -10°C to +70°C
- Open Time: Maximum 10 minutes at 23°C and 50% RH
- Curing Time: 24–48 hours depending on substrates
- Shelf Life: 24 months from date of manufacture
- Storage Conditions: Store in original unopened containers between +5°C and +25°C
Application Instructions
- Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants. Wood, plaster, and brick may be damp but not running wet.
- Application: Cut the tip of the cartridge, attach the nozzle, and cut an aperture to the required width. Apply using a standard sealant gun.
- Bonding: Apply the adhesive to one surface in strips or daubs. Bring the two surfaces together immediately and apply even pressure across the bond line.
- Repositioning: If necessary, adjust the positioning within the open time before the adhesive sets.
- Clamping: For heavy items, provide temporary support until the adhesive has dried.
Limitations
- Not suitable for use where both surfaces are non-porous (e.g., plastic/plastic or metal/metal); use EVERBUILD® Gun A Nail® Extra in such cases.
- Not recommended for use as a mirror adhesive; use EVERBUILD® Mirror Mate® instead.
- External applications may result in slower curing; for such applications, consider using EVERBUILD® Gun A Nail® Extra.
Cleaning of Tools
Clean tools and excess adhesive immediately with water before the adhesive cures. Cured adhesive must be removed mechanically.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
High-Strength, Solvent-Free Grab Adhesive for Interior Applications
EVERBUILD® Gun A Nail® Standard is a high-strength, gap-filling, multi-purpose building adhesive based on a tackified solvent-free system. It is designed for a wide variety of building and home improvement applications where at least one of the substrates to be bonded is porous.
Key Features & Benefits
- Solvent-Free: Environmentally friendly formulation with no hazardous solvents.
- Excellent Adhesion: Adheres to most common surfaces, including damp substrates.
- High Initial Grab: Exceptional early grab properties suitable for both vertical and horizontal positions.
- Gap-Filling: High solids formulation provides excellent gap-filling properties without shrinkage.
- Extended Open Time: Allows for easy repositioning after fixing.
- Water Clean-Up: Tools and excess adhesive can be cleaned with water before curing.
Ideal For
- Bonding dado rails, architraves, and skirting boards.
- Fixing wall cladding directly to internal wall surfaces or timber battens.
- Fixing battens directly onto walls without fastenings.
- Bonding carpet gripper systems to most floors without the need for nails or tacks.
- Bonding stair nosing to concrete or wooden stairs.
- Securing aluminium or other skin panels to the framework of portable industrial buildings and caravans.
Product Details
- Colour: White
- Packaging: 310ml cartridge
- Density: 1.50 – 1.60 g/cm³
- Solid Content: 75 – 80%
- Service Temperature: -10°C to +70°C
- Open Time: Maximum 10 minutes at 23°C and 50% RH
- Curing Time: 24–48 hours depending on substrates
- Shelf Life: 24 months from date of manufacture
- Storage Conditions: Store in original unopened containers between +5°C and +25°C
Application Instructions
- Surface Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and other contaminants. Wood, plaster, and brick may be damp but not running wet.
- Application: Cut the tip of the cartridge, attach the nozzle, and cut an aperture to the required width. Apply using a standard sealant gun.
- Bonding: Apply the adhesive to one surface in strips or daubs. Bring the two surfaces together immediately and apply even pressure across the bond line.
- Repositioning: If necessary, adjust the positioning within the open time before the adhesive sets.
- Clamping: For heavy items, provide temporary support until the adhesive has dried.
Limitations
- Not suitable for use where both surfaces are non-porous (e.g., plastic/plastic or metal/metal); use EVERBUILD® Gun A Nail® Extra in such cases.
- Not recommended for use as a mirror adhesive; use EVERBUILD® Mirror Mate® instead.
- External applications may result in slower curing; for such applications, consider using EVERBUILD® Gun A Nail® Extra.
Cleaning of Tools
Clean tools and excess adhesive immediately with water before the adhesive cures. Cured adhesive must be removed mechanically.
