Sikagard® Wood Preserver - Clear - 5L
Solvent-Free, Deep-Penetrating Protection for Timber
Sikagard® Wood Preserver Clear is a low-odour, solvent-free wood treatment designed to protect timber from wet rot, dry rot, decay, fungi, and wood-boring insects. Utilizing micro-fine active technology, it ensures deep penetration into the wood, providing long-lasting protection. Suitable for both interior and exterior use, it can be applied to damp timbers without compromising performance.
Key Features & Benefits
- Solvent-Free & Low Odour: Safe for indoor and outdoor applications.
- Deep Penetration: Micro-fine active technology ensures thorough protection.
- Fast Drying: Reduces downtime between application and overcoating.
- Non-Flammable: Enhances safety during application and storage.
- Versatile Application: Suitable for use on damp timbers.
Ideal For
- Interior and exterior rough-sawn or planed timber.
- Floorboards, joists, roof timbers, window frames, and doors.
- Pre-treatment before painting, staining, or varnishing.
Product Details
- Colour: Clear liquid.
- Packaging: 5-litre tin.
- Coverage: Approximately 3–4 m² per litre.
- Drying Time: Allow at least 2 hours between coats.
- Shelf Life: Use within 2 years of manufacture.
- Storage Conditions: Store between +5°C and +25°C in original containers.
Application Instructions
- Surface Preparation: Ensure timber is clean and free from coatings.
- Application: Shake well before use. Apply by brush, spray, or dipping. Apply a minimum of two coats, allowing at least 2 hours between coats.
- End Grain Treatment: Pay special attention to end grains. Where possible, dip or flood these areas for a minimum of 3 minutes.
- Overcoating: Allow to dry fully (typically 48 hours indoors) before applying paint, stain, or varnish.
Limitations
- Not suitable for surfaces in contact with food.
- Avoid contact with bitumen, roofing felt, or plastics.
- External timbers should be overcoated to reduce environmental impact.
Cleaning of Tools
Clean tools with water or appropriate solvent immediately after use.
Original: $30.86
-65%$30.86
$10.80Sikagard® Wood Preserver - Clear - 5L
Solvent-Free, Deep-Penetrating Protection for Timber
Sikagard® Wood Preserver Clear is a low-odour, solvent-free wood treatment designed to protect timber from wet rot, dry rot, decay, fungi, and wood-boring insects. Utilizing micro-fine active technology, it ensures deep penetration into the wood, providing long-lasting protection. Suitable for both interior and exterior use, it can be applied to damp timbers without compromising performance.
Key Features & Benefits
- Solvent-Free & Low Odour: Safe for indoor and outdoor applications.
- Deep Penetration: Micro-fine active technology ensures thorough protection.
- Fast Drying: Reduces downtime between application and overcoating.
- Non-Flammable: Enhances safety during application and storage.
- Versatile Application: Suitable for use on damp timbers.
Ideal For
- Interior and exterior rough-sawn or planed timber.
- Floorboards, joists, roof timbers, window frames, and doors.
- Pre-treatment before painting, staining, or varnishing.
Product Details
- Colour: Clear liquid.
- Packaging: 5-litre tin.
- Coverage: Approximately 3–4 m² per litre.
- Drying Time: Allow at least 2 hours between coats.
- Shelf Life: Use within 2 years of manufacture.
- Storage Conditions: Store between +5°C and +25°C in original containers.
Application Instructions
- Surface Preparation: Ensure timber is clean and free from coatings.
- Application: Shake well before use. Apply by brush, spray, or dipping. Apply a minimum of two coats, allowing at least 2 hours between coats.
- End Grain Treatment: Pay special attention to end grains. Where possible, dip or flood these areas for a minimum of 3 minutes.
- Overcoating: Allow to dry fully (typically 48 hours indoors) before applying paint, stain, or varnish.
Limitations
- Not suitable for surfaces in contact with food.
- Avoid contact with bitumen, roofing felt, or plastics.
- External timbers should be overcoated to reduce environmental impact.
Cleaning of Tools
Clean tools with water or appropriate solvent immediately after use.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Solvent-Free, Deep-Penetrating Protection for Timber
Sikagard® Wood Preserver Clear is a low-odour, solvent-free wood treatment designed to protect timber from wet rot, dry rot, decay, fungi, and wood-boring insects. Utilizing micro-fine active technology, it ensures deep penetration into the wood, providing long-lasting protection. Suitable for both interior and exterior use, it can be applied to damp timbers without compromising performance.
Key Features & Benefits
- Solvent-Free & Low Odour: Safe for indoor and outdoor applications.
- Deep Penetration: Micro-fine active technology ensures thorough protection.
- Fast Drying: Reduces downtime between application and overcoating.
- Non-Flammable: Enhances safety during application and storage.
- Versatile Application: Suitable for use on damp timbers.
Ideal For
- Interior and exterior rough-sawn or planed timber.
- Floorboards, joists, roof timbers, window frames, and doors.
- Pre-treatment before painting, staining, or varnishing.
Product Details
- Colour: Clear liquid.
- Packaging: 5-litre tin.
- Coverage: Approximately 3–4 m² per litre.
- Drying Time: Allow at least 2 hours between coats.
- Shelf Life: Use within 2 years of manufacture.
- Storage Conditions: Store between +5°C and +25°C in original containers.
Application Instructions
- Surface Preparation: Ensure timber is clean and free from coatings.
- Application: Shake well before use. Apply by brush, spray, or dipping. Apply a minimum of two coats, allowing at least 2 hours between coats.
- End Grain Treatment: Pay special attention to end grains. Where possible, dip or flood these areas for a minimum of 3 minutes.
- Overcoating: Allow to dry fully (typically 48 hours indoors) before applying paint, stain, or varnish.
Limitations
- Not suitable for surfaces in contact with food.
- Avoid contact with bitumen, roofing felt, or plastics.
- External timbers should be overcoated to reduce environmental impact.
Cleaning of Tools
Clean tools with water or appropriate solvent immediately after use.
