Red Oxide Primer Paint - 380ml Aerosol
Red Oxide Primer is a fast-drying, anti-corrosive metal primer designed to protect ferrous substrates and improve adhesion of subsequent topcoats. It’s ideal for new steel and for maintenance work on prepared metal surfaces, delivering a tough, even base that resists rust and promotes long-term coating performance on site or in the workshop.
Key Features & Benefits
- Anti-Corrosive Formula: Inhibits rust on ferrous metals for longer-lasting protection.
- High Adhesion Base: Improves key for topcoats including alkyd, acrylic and polyurethane finishes.
- Fast Drying: Enables quicker handling and recoat schedules in typical site conditions.
- Smooth, Opaque Coverage: Levels well to create a consistent, easy-to-overcoat surface.
- Interior & Exterior: Suitable for workshop fabrication and outdoor maintenance.
Product & Technical Details
- Type: Red oxide anti-corrosive metal primer
- Substrates: Ferrous metals (steel/iron) correctly prepared
- Finish/Colour: Red oxide (matt/eggshell primer finish)
- Overcoat With: Compatible solvent- or water-based topcoats (check compatibility)
- Environment: Interior & exterior
- Typical Uses: Gates, railings, structural steel, brackets, machinery guards, metalwork repairs
Suitable Applications
- Priming new or prepared steel before decorative or industrial topcoats
- Maintenance of railings, gates, fences and metal fixtures
- Fabrication touch-up and protection of cut edges and drilled areas
Instructions for Use
- Prepare surface: remove rust, scale and loose coatings to a sound, bright metal; abrade, degrease and dry.
- Stir thoroughly. Apply in thin, even coats by brush, roller or suitable spray.
- Allow to dry fully between coats. Follow recommended recoat times and film build.
- Test topcoat compatibility on a small area before full application.
Limitations & Precautions
- Not for direct application to non-ferrous metals without appropriate priming.
- Apply in dry, well-ventilated conditions above 5 °C; avoid high humidity.
- Observe all safety guidance; keep away from ignition sources if using solvent-borne products.
Red Oxide Primer delivers a reliable anti-corrosive base coat that improves adhesion and extends the life of metalwork coatings, making it a go-to choice for both fabrication and maintenance projects.
Original: $6.45
-65%$6.45
$2.26Red Oxide Primer Paint - 380ml Aerosol
Red Oxide Primer is a fast-drying, anti-corrosive metal primer designed to protect ferrous substrates and improve adhesion of subsequent topcoats. It’s ideal for new steel and for maintenance work on prepared metal surfaces, delivering a tough, even base that resists rust and promotes long-term coating performance on site or in the workshop.
Key Features & Benefits
- Anti-Corrosive Formula: Inhibits rust on ferrous metals for longer-lasting protection.
- High Adhesion Base: Improves key for topcoats including alkyd, acrylic and polyurethane finishes.
- Fast Drying: Enables quicker handling and recoat schedules in typical site conditions.
- Smooth, Opaque Coverage: Levels well to create a consistent, easy-to-overcoat surface.
- Interior & Exterior: Suitable for workshop fabrication and outdoor maintenance.
Product & Technical Details
- Type: Red oxide anti-corrosive metal primer
- Substrates: Ferrous metals (steel/iron) correctly prepared
- Finish/Colour: Red oxide (matt/eggshell primer finish)
- Overcoat With: Compatible solvent- or water-based topcoats (check compatibility)
- Environment: Interior & exterior
- Typical Uses: Gates, railings, structural steel, brackets, machinery guards, metalwork repairs
Suitable Applications
- Priming new or prepared steel before decorative or industrial topcoats
- Maintenance of railings, gates, fences and metal fixtures
- Fabrication touch-up and protection of cut edges and drilled areas
Instructions for Use
- Prepare surface: remove rust, scale and loose coatings to a sound, bright metal; abrade, degrease and dry.
- Stir thoroughly. Apply in thin, even coats by brush, roller or suitable spray.
- Allow to dry fully between coats. Follow recommended recoat times and film build.
- Test topcoat compatibility on a small area before full application.
Limitations & Precautions
- Not for direct application to non-ferrous metals without appropriate priming.
- Apply in dry, well-ventilated conditions above 5 °C; avoid high humidity.
- Observe all safety guidance; keep away from ignition sources if using solvent-borne products.
Red Oxide Primer delivers a reliable anti-corrosive base coat that improves adhesion and extends the life of metalwork coatings, making it a go-to choice for both fabrication and maintenance projects.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Red Oxide Primer is a fast-drying, anti-corrosive metal primer designed to protect ferrous substrates and improve adhesion of subsequent topcoats. It’s ideal for new steel and for maintenance work on prepared metal surfaces, delivering a tough, even base that resists rust and promotes long-term coating performance on site or in the workshop.
Key Features & Benefits
- Anti-Corrosive Formula: Inhibits rust on ferrous metals for longer-lasting protection.
- High Adhesion Base: Improves key for topcoats including alkyd, acrylic and polyurethane finishes.
- Fast Drying: Enables quicker handling and recoat schedules in typical site conditions.
- Smooth, Opaque Coverage: Levels well to create a consistent, easy-to-overcoat surface.
- Interior & Exterior: Suitable for workshop fabrication and outdoor maintenance.
Product & Technical Details
- Type: Red oxide anti-corrosive metal primer
- Substrates: Ferrous metals (steel/iron) correctly prepared
- Finish/Colour: Red oxide (matt/eggshell primer finish)
- Overcoat With: Compatible solvent- or water-based topcoats (check compatibility)
- Environment: Interior & exterior
- Typical Uses: Gates, railings, structural steel, brackets, machinery guards, metalwork repairs
Suitable Applications
- Priming new or prepared steel before decorative or industrial topcoats
- Maintenance of railings, gates, fences and metal fixtures
- Fabrication touch-up and protection of cut edges and drilled areas
Instructions for Use
- Prepare surface: remove rust, scale and loose coatings to a sound, bright metal; abrade, degrease and dry.
- Stir thoroughly. Apply in thin, even coats by brush, roller or suitable spray.
- Allow to dry fully between coats. Follow recommended recoat times and film build.
- Test topcoat compatibility on a small area before full application.
Limitations & Precautions
- Not for direct application to non-ferrous metals without appropriate priming.
- Apply in dry, well-ventilated conditions above 5 °C; avoid high humidity.
- Observe all safety guidance; keep away from ignition sources if using solvent-borne products.
Red Oxide Primer delivers a reliable anti-corrosive base coat that improves adhesion and extends the life of metalwork coatings, making it a go-to choice for both fabrication and maintenance projects.
