🎉 Up to 70% Off Selected ItemsShop Sale
Remmers MB 2K – Multi-Functional Waterproofing
Flexible, Crack-Bridging, and Bitumen-Free Waterproofing for Structural Protection
Remmers MB 2K is a high-performance, two-component, polymer-modified waterproofing compound designed for versatile applications in both new construction and refurbishment projects. Combining the strengths of flexible mineral seal slurries and bituminous thick coatings, MB 2K delivers long-lasting, crack-bridging protection that meets modern waterproofing standards—without the use of bitumen.
Key Features & Benefits
- Multi-Functional Application: Waterproofs basements, foundations, floor slabs, plinths, balconies, and more.
- Crack-Bridging Capability: Bridges cracks ≥ 3 mm for reliable substrate protection.
- Rapid Drying: Full drying in 8–24 hours depending on conditions—speeds up construction timelines.
- High Adhesion Strength: Bonds to mineral and aged bitumen substrates (subject to condition and preparation).
- Flexible Application: Apply by brush, trowel, or spray to suit site conditions and surface profiles.
- Solvent-Free & Low VOC: Safer for applicators and environmentally responsible.
- Short-Term UV Resistance: Withstands temporary exposure during construction—final finish recommended.
- Tested to DIN EN 14891: Suitable for liquid-applied waterproofing under ceramic finishes.
Application Areas
- New build waterproofing (walls, slabs, and foundations)
- Retrofit waterproofing (WTA-compliant)
- Basement walls and exterior plinths
- Waterproofing beneath or behind walls
- Sealing pipe penetrations and movement joints
- Adhesive for perimeter insulation boards
- Connecting to watertight concrete components
Technical Specifications
- Composition: Polymer binder, cement, mineral fillers, additives
- Density: Approx. 1.15 kg/dm³ (mixed)
- Drying Time: 8 hours at 23°C / 50% RH; up to 24 hours at 5°C
- Crack-Bridging: ≥ 3 mm (DIN EN 14891)
- Water Impermeability: Resists up to 10 m water head
- Reaction to Fire: Class E (DIN EN 13501-1)
Packaging & Mixing
- Available in: 8.3 kg and 25 kg combi-containers (powder + polymer)
-
Mixing Instructions:
- Stir liquid component thoroughly
- Add powder slowly while mixing for ~1 minute
- Let stand briefly to release air
- Mix again for 2 minutes to a smooth, lump-free paste
Comparison Table
| Feature | Remmers MB 2K | Bitumen Coating | Mineral Slurry | Cementitious Waterproofing |
|---|---|---|---|---|
| Crack-Bridging | ≥ 3 mm | ≤ 1 mm | No | Limited |
| Drying Time | Fast (8–24 hrs) | Slow (2–3 days) | Moderate | Moderate |
| Application Method | Brush, trowel, spray | Trowel/brush only | Brush/spray | Brush only |
| Water Pressure Resistance | Up to 10 m head | Moderate | High | Moderate |
| Bitumen-Free | Yes | No | Yes | Yes |
| Adhesion to Substrates | Excellent (mineral + prepared bitumen) | Poor on damp/bitumen | Good on mineral | Good |
| VOC & Solvent-Free | Low VOC | No | Yes | Yes |
| Weather/UV Resistance | Short-term | Low | Moderate | Low |
| Thermal Stability | Excellent | Poor (melts/shrinks) | Moderate | Good |
$60.90
Original: $174.00
-65%Remmers MB 2K – Multi-Functional Waterproofing—
$174.00
$60.90Remmers MB 2K – Multi-Functional Waterproofing
Flexible, Crack-Bridging, and Bitumen-Free Waterproofing for Structural Protection
Remmers MB 2K is a high-performance, two-component, polymer-modified waterproofing compound designed for versatile applications in both new construction and refurbishment projects. Combining the strengths of flexible mineral seal slurries and bituminous thick coatings, MB 2K delivers long-lasting, crack-bridging protection that meets modern waterproofing standards—without the use of bitumen.
Key Features & Benefits
- Multi-Functional Application: Waterproofs basements, foundations, floor slabs, plinths, balconies, and more.
- Crack-Bridging Capability: Bridges cracks ≥ 3 mm for reliable substrate protection.
- Rapid Drying: Full drying in 8–24 hours depending on conditions—speeds up construction timelines.
- High Adhesion Strength: Bonds to mineral and aged bitumen substrates (subject to condition and preparation).
- Flexible Application: Apply by brush, trowel, or spray to suit site conditions and surface profiles.
- Solvent-Free & Low VOC: Safer for applicators and environmentally responsible.
- Short-Term UV Resistance: Withstands temporary exposure during construction—final finish recommended.
- Tested to DIN EN 14891: Suitable for liquid-applied waterproofing under ceramic finishes.
Application Areas
- New build waterproofing (walls, slabs, and foundations)
- Retrofit waterproofing (WTA-compliant)
- Basement walls and exterior plinths
- Waterproofing beneath or behind walls
- Sealing pipe penetrations and movement joints
- Adhesive for perimeter insulation boards
- Connecting to watertight concrete components
Technical Specifications
- Composition: Polymer binder, cement, mineral fillers, additives
- Density: Approx. 1.15 kg/dm³ (mixed)
- Drying Time: 8 hours at 23°C / 50% RH; up to 24 hours at 5°C
- Crack-Bridging: ≥ 3 mm (DIN EN 14891)
- Water Impermeability: Resists up to 10 m water head
- Reaction to Fire: Class E (DIN EN 13501-1)
Packaging & Mixing
- Available in: 8.3 kg and 25 kg combi-containers (powder + polymer)
-
Mixing Instructions:
- Stir liquid component thoroughly
- Add powder slowly while mixing for ~1 minute
- Let stand briefly to release air
- Mix again for 2 minutes to a smooth, lump-free paste
Comparison Table
| Feature | Remmers MB 2K | Bitumen Coating | Mineral Slurry | Cementitious Waterproofing |
|---|---|---|---|---|
| Crack-Bridging | ≥ 3 mm | ≤ 1 mm | No | Limited |
| Drying Time | Fast (8–24 hrs) | Slow (2–3 days) | Moderate | Moderate |
| Application Method | Brush, trowel, spray | Trowel/brush only | Brush/spray | Brush only |
| Water Pressure Resistance | Up to 10 m head | Moderate | High | Moderate |
| Bitumen-Free | Yes | No | Yes | Yes |
| Adhesion to Substrates | Excellent (mineral + prepared bitumen) | Poor on damp/bitumen | Good on mineral | Good |
| VOC & Solvent-Free | Low VOC | No | Yes | Yes |
| Weather/UV Resistance | Short-term | Low | Moderate | Low |
| Thermal Stability | Excellent | Poor (melts/shrinks) | Moderate | Good |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Flexible, Crack-Bridging, and Bitumen-Free Waterproofing for Structural Protection
Remmers MB 2K is a high-performance, two-component, polymer-modified waterproofing compound designed for versatile applications in both new construction and refurbishment projects. Combining the strengths of flexible mineral seal slurries and bituminous thick coatings, MB 2K delivers long-lasting, crack-bridging protection that meets modern waterproofing standards—without the use of bitumen.
Key Features & Benefits
- Multi-Functional Application: Waterproofs basements, foundations, floor slabs, plinths, balconies, and more.
- Crack-Bridging Capability: Bridges cracks ≥ 3 mm for reliable substrate protection.
- Rapid Drying: Full drying in 8–24 hours depending on conditions—speeds up construction timelines.
- High Adhesion Strength: Bonds to mineral and aged bitumen substrates (subject to condition and preparation).
- Flexible Application: Apply by brush, trowel, or spray to suit site conditions and surface profiles.
- Solvent-Free & Low VOC: Safer for applicators and environmentally responsible.
- Short-Term UV Resistance: Withstands temporary exposure during construction—final finish recommended.
- Tested to DIN EN 14891: Suitable for liquid-applied waterproofing under ceramic finishes.
Application Areas
- New build waterproofing (walls, slabs, and foundations)
- Retrofit waterproofing (WTA-compliant)
- Basement walls and exterior plinths
- Waterproofing beneath or behind walls
- Sealing pipe penetrations and movement joints
- Adhesive for perimeter insulation boards
- Connecting to watertight concrete components
Technical Specifications
- Composition: Polymer binder, cement, mineral fillers, additives
- Density: Approx. 1.15 kg/dm³ (mixed)
- Drying Time: 8 hours at 23°C / 50% RH; up to 24 hours at 5°C
- Crack-Bridging: ≥ 3 mm (DIN EN 14891)
- Water Impermeability: Resists up to 10 m water head
- Reaction to Fire: Class E (DIN EN 13501-1)
Packaging & Mixing
- Available in: 8.3 kg and 25 kg combi-containers (powder + polymer)
-
Mixing Instructions:
- Stir liquid component thoroughly
- Add powder slowly while mixing for ~1 minute
- Let stand briefly to release air
- Mix again for 2 minutes to a smooth, lump-free paste
Comparison Table
| Feature | Remmers MB 2K | Bitumen Coating | Mineral Slurry | Cementitious Waterproofing |
|---|---|---|---|---|
| Crack-Bridging | ≥ 3 mm | ≤ 1 mm | No | Limited |
| Drying Time | Fast (8–24 hrs) | Slow (2–3 days) | Moderate | Moderate |
| Application Method | Brush, trowel, spray | Trowel/brush only | Brush/spray | Brush only |
| Water Pressure Resistance | Up to 10 m head | Moderate | High | Moderate |
| Bitumen-Free | Yes | No | Yes | Yes |
| Adhesion to Substrates | Excellent (mineral + prepared bitumen) | Poor on damp/bitumen | Good on mineral | Good |
| VOC & Solvent-Free | Low VOC | No | Yes | Yes |
| Weather/UV Resistance | Short-term | Low | Moderate | Low |
| Thermal Stability | Excellent | Poor (melts/shrinks) | Moderate | Good |
